| |
 |
| analog gauge front view |
|
| We sell a bullet shaped steel housing for both the 1.9" mini-gauges and the 2" Dakota Digital gauge. This steel housing is for custom fabricators who would like to make their own custom bars or gas tanks with a gauge or gauges built right in.
$45.00USD
Call 450-201-0787 for more info and to place an order or e-mail us at info@motoxcycle.com
|
 |
| Side view of bullet shaped housing |
|
|
 |
| frontview of Dakota Digital 2" gauge housing |
|
|
 |
| Stainless bolt set: $85.00USD |
|
In order to help custom builders around the world realize their full potential we are offering specialized custom hardware.
This custom handlebar bolt set comes with two stainless steel bolts 3/4" NF, two stainless steel cup washers and two custom handlebar rubbers.
The bolts are drilled with a 1/2" hole to run wires and lines through. This handlebar bolt set is designed to fit into stock Harley-Davidson or custom triple trees with the same riser hole diameter.
The rubber bushings supplied with this set of bolts are thinner than the original Harley rubber bushings and are made of a harder rubber compound to work with the larger bolts. No drilling of your triple trees is necessary.
We also sell the riser plugs (this is the part that you would weld to the bottom of the handlebar tubing in order to bolt the handlebars to the triple tree) and the bent tubing so you can position the handlebars the way you would like and then weld them. Tubing sets include the 1" portion of handlebar for the grips and hand controls.
Call for pricing : 450-201-0787 or e-mail info@motoxcycle.com
Available tubing sizes with matching riser plugs: 1.25", 1.375" and 1.5"
|
 |
| custom handlebar riser bracket |
|
|
|
 |
| side view of handlebar riser bracket |
|
|
|
This handlebar riser bracket is for the fabricator that wants to make his own fully enclosed sheetmetal bars. This bracket is made for 1.375" tubing with .120 wall. The mounting holes are set at 3.5" centers and are threaded 1/2-13NC to match Harley-Davidson specifications. This bracket has steps machined into it so the sheetmetal fits into the bracket when it is welded.
The two large holes in the center are for running wiring and cables/hydraulic lines through.
$45.00USD
Call 450-201-0787 or e-mail us at info@motoxcycle.com for more information.
|
 |
| custom hourglass neck |
|
This CNC machined custom hourglass neck accepts Harley-Davidson softail neck races and bearings and comes with a special internal fork stop built right in! No special plate needed to make this work. Call 450-201-0787 for more information.
New design available.
$87.50USD
|
 |
| Custom axle plate for swingarms or rigid frames |
|
These custom CNC machined axle plates are perfect for the builder that wants to build his own frame or modify an existing swingarm.
$275.00USD per set. Includes axle adjusting set screws.
Available for 1 1/4" tubing or 1 3/8" tubing
|
|
