 |
| MotoXcycle's JigMate tool |
|
|
| Here is a picture of Jig-Mate holding up a custom single sided rigid frame. |
 |
| Close-up of Jig-Mate clamp. |
|
JigMate is my invention. I needed a tool that could hold parts perfectly still in the right location while I tacked them together. It also had to be strong enough to resist the force induced when the weld cools down and the material shrinks. I showed this tool to Dave Perewitz and he was so impressed he offered to sell it for me in the USA. I think it is about to be seen in two Discovery Build-Offs shot this year (2006). JigMate is the ultimate fabrication tool for fabricators of custom items. At a fully extended height of two feet and a load carrying capacity of 175lbs JigMate will securely hold metal parts precisely at the right position so you can weld them together. JigMate is fully adjustable at any angle and position. JigMate's unique holding system is designed to be used with ViceGrips or other clamping devices.
-Fausto
Patents pending.
$350.00USD
Jig-Mate is endorsed by Dave Perewitz. |
|
